Introduction:
Nowadays, pool lights are quite hyped by people. That’s because, other than lights, it creates an aesthetic vibe to the pool. In summer, everything is fine, and you can swim over. However, in winter, the weather doesn’t allow you to swim. Therefore, you have to close the pool during the season partially. While searching for tips, you would come across the term winterize pool lights. So this blog will help you learn about it.
What do winterize pool lights mean?
There are many different processes for winterizing those lights. However, try this one, as it clearly shows what you have to do. Also, the process is quite simple and convenient for everyone to use. You won’t require any professional assistant or a company to pay for this job. So, let’s start with the steps.
The best way is to empty the pool professionally. Also, they have to turn off and remove the pool lights altogether. This process of removing the lights is called winterizing pool lights. Let’s know jump to the steps required for this process.
How to winterize pool lights- the steps
There are many different processes for winterizing those lights. However, try this one, as it clearly shows what you have to do. Also, the process is quite simple and convenient for everyone to use. You won’t require any professional assistant or a company to pay for this job. So, let’s start with the steps.
Tracing the lights
The first step involves you tracing the bulbs or lights wherever they are.
Check for the power supply cable
The next step to winterize pool lights is checking the power cable. You will have to search for a cable that provides an electric supply to the bulb. Usually, the cable is easily identified as it is the only cable going back to the power plug from the bulb. You will come across a plastic cap that covers the cable. Although you cannot remove the cap with your hands, you will require a sharp object in a flat, pointed shape. A flat screwdriver can do this job for you.
Similarly, you would find a slight push level underneath the cap. So, push the screwdriver in the same direction and pull the cap back. That’s a simple process to remove the cap of the bulb.
Cut the power supply cable from the bulb
Once you have removed its cap, the next step involves detaching the cable from the bulb. The cap opens you will come across two wires, live and neutral. Then, separate the two wires connecting the two wires of bulbs. Your bulb would now get separated from the power cable.
Fold the two wires
How to winterize pool lights? Look for this step. Afterward, you must put aside the power cable and pay attention to the wires connected to the bulb. You have to fold the wires in the inward direction of the bulb holder.
Dismantle the lock of the bulb
To winterize pool lights, follow this step. Now, gently twist the lock in a clockwise direction or anticlockwise to dismantle the lock. You can check the direction the lock loses; it is the right direction. Then, put this lock aside.
Detach the light bulb from its connection
It is one of the most important steps to winterize pool lights. Take precautionary measures before doing it. To start, you have to cover the end of the bulb from one side. It is where you have just removed the lock. Also, keep the second hand inside the pool where you have installed the bulb.
Moreover, the purpose of putting your hand on the outer side of the bulb is to prevent water from splashing out of the pool. On the other hand, twist the bulb or even pull it so that it gets removed from the connection. Once you have dismantled the bulb, put the bulb in a dry place.
One thing to notice is that don’t worry if water starts flowing out of the clamp. To winterize pool lights, you shall use maximum effort to cover that hole as much as possible.
Fix the winterizing plug
How to winterize pool lights? You must close the bulb hole entirely with a unique tool for the next step. The tool is called a winterizing plug. Yes, it comes in a shape of a plug. If you closely examine, one side of the plug is long while the other has a circular flat shape. So, you have to then insert the flat surface in the place where you had the bulb installed. Then, slightly twist the plugin’s anticlockwise direction to fix it properly.
Remove the filter hose
Lastly, with the help of a small screwdriver, lose the screws connecting the bulb clamp to the filter. When you have loosened the screws, the next step of winterizing pool lights is simple. Use your hands to twist the filter pipe and try to remove it.
How to winterize pool lights gets accomplished when you remove the filter.
Alternatives to winterizing the lights of the pool
In addition to the process described above, there are some alternatives that you could use.
Some swimming pool lights come with a coil of cable that has a long size. So, use that cable alone to winterize pool lights. To start this process, take a small bag; the bag can be a fabric or plastic bag. Then, you have to place some stones in it. Or if you don’t find a bag, then there is another thing which you can do.
Take a plastic bottle, and make sure you make holes in it. Then, you have to tie the bottle with a thick string or even rope. Similarly, fill that bottle with stones. The next step for winterizing pool lights is to drop down the stone-filled bag or bottle along the length of the bulb cable.
The weight of the stones helps the string or rope you reach down to the bulb. The next step is to find out which style of bulb is there. Suppose the bulb comes with a screw attached to the top surface. Compared to other screws, the screw attached is brass-made; hence you will find it very soft. Extract the screw and then release the bub with the attached weight. How to winterize pool lights process completes with the last step to keep screws safe.
Conclusion:
Well, it is essential to winterize pool lights. Therefore, you shall look into the steps required to do this job. Without professional help, you would do this job properly.